himac CR30NX High-speed Refrigerated Centrifuge
100,000Xg swing rotors
Do you need an ultracentrifuge, because you need 100,000Xgfor a swing rotor centrifugation?
With 100,000Xg swing rotor centrifugation, CR30NX andtop loading swing rotor R25ST or R25ST2 supports your Rate zonal centrifugation or Isopycnic centrifugation.
100,000Xg angle rotor
Or with 100,000Xg angle rotor centrifugation,CR30NX supports your cell fractionation.
And, in CR30NX, two types of 6L rotors are available; R7A (6x1L bottle) and R9A2 (4 x 1.5L bottle).
All rotors maintained at 4℃ at maximum rotor speed.
Powerful refrigeration system with appropriate vacuum control
With the latest noise reduction system, the operating sound level is 56dB; the quietest in this class high-speed refrigerated centrifuges, as of June 2018.
New rotor ID detection and self-locking rotor system
Rotor model and its maximum speed are automatically identified just the rotor is placed on the drive shaft.In addition, rotor system is self-locking and no need install the rotor by screw, same as existing himac high-speed centrifuges.
- rotor speed
- rotor temperature
- rotor ID
- vacuum level
MFRS : Mist filter refresh system
Rotating the filter regularly by the motor, oil is removed from the filter and returned to the vacuum pump.
Data communication system
1) Remote operation and monitoring: “himac View” with your iPhone or Android phone.
2) Optional log management software himac LogManager
(Digital signature, audit trail, and encrypted data files, etc. are available.)
Door lock with Door Open Passcode
Door opener foot switch (option)
Rotor cover detection sensor with alert function
Rotor cover detection sensor prevents rotors from spinning without rotor covers.
Multilingual Display (10 Languages)
- Chinese (simplified)
|Maximum speed||30,000rpm (R30AT angle rotor)|
|Maximum RCF||by swing rotor: 118,000Xg (R25ST2) ，by angle rotor: 110,000Xg (R30AT)|
|Max. Nominal Capacity||6L : R7A rotor (6 X 1,000mL) or R9A2 rotor (4 X 1,500mL)|
|Speed Control Range||300rpm to 30,000rpm(*1)|
|Temperature setting range||-20℃ to + 40℃|
|Temperature Accuracy||± 2℃(*2)|
|Acceleration/ Deceleration mode||Accel 11 modes, Decel 10 modes with 2 modes variable deceleration slope|
|Program Function||1,000 programs|
|Drive unit||Induction Motor (Inverter)|
|Refrigerator||Rotary Inverter Driven Compressor (Refrigerant: R410A)|
|Interface||USB X 1, LAN X1|
|Display||High-resolution 6.5 inch color LCD|
|Keypad||Touch sensitive LCD panel with GUI icons|
|Safety devices||Door interlock, dual-overspeed detector, imbalance detector,rotor cover detector,over-temperature detector|
|Noise Level||Less than 56(dBA)|
|Applicable standard||CE, cCSAus(*3)|
|1) EMC Directive||EN61326-1|
UL Std. No. 61010-1, UL Std. No. 61010-2-020 (*3)
CAN/CSA-C22.2 No. 61010-1, CAN/CSA-C22.2 No. 61010-2-020 (*3)
Single Phase, AC200/208/220/230/240V +/-10%, 50/60Hz, 30A
Three-phase four-wire:AC 220/230/240V +/-10%, 50/60Hz, 16A
|Heat Output||Less than 1.2 kW(*4)|
|Dimension||708mm(W) x 892mm (D) x 866mm (H) (height to table: 865mm)|
- R9A2 rotor’s minimum rotation speed setting is 2,000 rpm.
- Temperature calibration may be required depending on users’ operating conditions and operating environments.
- For Canada and United States, only.
- When R30AT rotor runs at 30,000 rpm