Rotors for CR22N

Unique 6,000 mL Rotor model R9A2 Fixed Angle Rotor & 1,500 mL PP Bottle (Wide Mouth)

We proudly introduce the newly developed 1500PP Bottle (WM). We are the 1st manufacturer developed unique 1,500 mL triangular bottle for high-speed refrigerated centrifuge use. The unique 1,500 mL triangular bottle has a wide mouth (WM) so that it is easy to collect separated sample (pellet) and clean the bottle. We could minimize the size and weight of our new 6,000 mL capacity fixed angle rotor with 1,500 mL triangular bottle. Comparing with R7A fixed angle rotor (1,000 mL x 6 bottles) for large-capacity refrigerated centrifuge, R9A2 rotor is lighter than R7A rotor and R9A2 rotor can offer higher g force.

R9A2 : 17.1 kg / 15,100 xg (8,500 rpm)
R7A : 19.0 kg / 11,100 xg (7,000 rpm)

R9A2 rotor and 1500PP bottle (WM) including its cap can be sterilized by autoclave (at 121 ℃ for 20 min.)
4 sets 1500PP bottle (WM) including cap, cap support, inner cap and O-ring are supplied as standard accessories with R9A2 rotor.

R9A2 & 1500PP Bottle

Model R9A2
Max. Speed (rpm) 8,500
Max.RCF (xg) 15,100
K-factor (at max. speed) 4,313
Max. Nominal Capacity 1,500 mL x 4 bottles (6,000 mL)
Tube Cavity Angle 22º
Rotor Weight (kg) 17.1
Product No. 914374D0

Configuration of 1500PP Bottle (WM)

Part No. Description
S310087A 1500PP Bottle (WM) (4pcs/set : bottle only)
S310071B 1500AL Cap (2pcs/set : cap only)
S412932A Cap Support (4pcs/set : cap support only)
S412933A 1000 Inner Cap (WM) 2 (2pcs/set : inner cap only)
S412935A O-ring (10pcs/set : O-ring only)

Standard Rotor : Fixed Angle Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R27A
914386D0
22,000 58,700 50 x 8 29 x 103 50PP bottle x 8
R22A6
914375D0
22,000 55,100 10 x 12 16 x 82 10PA bottle x 12
R22A4
914363D0
22,000 55,200 2 x 30 11 x 42 2.0 / 1.5 ml Micro tube
(marketed product)
R21A2
914373D0
21,000 50,000 30 x 6 26 x 97 300PA bottle x 6
R20A2
914295D0
20,000 48,000 50 x 8 29 x 103 50PA tube x 8
R18A
914359D0
18,000 42,200 50 x 8 30 x 115 himac 50TC tube x 100
12,000 18,760 50 x 8 30 x 115 50ml culture tube
(marketed product)
R15A
914360D0
15,000 32,300 50 x 10 30 x 115 himac 50TC tube x 100
12,000 20,670 50 x 10 30 x 115 50ml culture tube
(marketed product)
15,000 32,500 15 x 10 17 x 120 himac15TC tube x 100
11,000 17,370 15 x 10 17 x 120 15ml culture tube
(marketed product)
R14A
914306D0
14,000 30,240 250 x 4 62 x 124 250PP bottle x 4
R13A
914366D0
13,000 26,400 250 x 6
11 x 6
62 x 124
16 x 82
250PP bottle x 6
R12A6
914357D0
12,000 22,500 500 x 4 73 x 163 500PA bottle x 4
R12A3
914325D0
12,000 23,800 250 x 6 62 x 124 250PP bottle x 6
R10A5
914365D1
10,000 18,900 500 x 6 69.5 x 169 500ml bottle (Nalgene™)
(marketed product)
R10A3
914345D1
10,000 18,800 500 x 6 73 x 163 500PA bottle x 6
R9A2
914374D0
8,500 15,100 1,500 x 4 126 x 175 1500PP Bottle (WM) x 4
R9A
914364D0
9,000 15,300 1,000 x 4 98 x 168 1000PP Bottle (WM) x 4

The rotor marked with this icon can be sterilized by autoclave at 121 ℃ for 20 minutes.
Biosafety of the rotor marked with this icon was validated by an independent and a third party facility (Public Health England, Porton Down, UK). However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
Biosafety of the rotor marked with this icon was verified by our in-house test according to the procedure modified IEC61010-2-020 Annex AA, using Bacillus subtilis containing ≥ 1x10^6 spores/ml. However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.

For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.
Note :


  1. Listed (marketed product) tubes or bottles are commercially available on the market. Please purchase directly from your local supplier.
  2. Nalgene™ is a registered trademark and the property of Thermo Fisher Scientific or its subsidiaries.
  3. R9A2 rotor is an exclusive model for CR22N. It cannot be used with our former models, such as CR-GⅢ, CR-GⅡ, CR-G and CR-F series.
  4. R27A rotor can be cooled to 4 ℃ at 20,600 rpm (51,500 xg).
  5. The rotor warranty period is 7 years.

Standard Rotor : Swinging Bucket Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R8S
914371D0
8,000 11,500 50 x 4 30 x 115 50ml culture tube
(marketed product)
R5S4
914369D0
4,700 3,100 96DW x 4
96MP x 12
W 12 x D 86 x H 90 96 - hole DeepWell plate
(marketed product)
96 - hole MicroPlate
(marketed product)
R4SS
914370D0
4,000 2,900 - - (marketed product)
15x10S adapter
S308546A
4,000 2,860 15 x 40 16.5 x 110
15x8S adapter
S307334A
4,000 2,860 15 x 32 16.5 x 105
10x10SB adapter
S308695A
4,000 2,800 10 x 40 15.6 x 100
10x8S adapter
S307333A
4,000 2,860 10 x 32 13.2 x 100
5x8S adapter
S307332A
4,000 2,380 5 x 32 13.2 x 78
50x2S adapter
S308844A
3,500 2,120 50 x 8 35 x 100
15TCx6S adapter
S307335A
4,000 2,900 15 x 24 17 x 120
50TCx2S adapter
S307336A
4,000 2,860 50 x 8 30 x 115
R3S
914315D0
3,000 1,940 - - (marketed product)
500PA tube
S303830A
3,000 1,940 500 x 4 103 x 108
Tube rack BL
336821A
3,000 1,870 10 x 120 12 x 120
Tube rack GR
336822A
3,000 1,870 7 x 96 14 x 120
Tube rack YE
336823A
3,000 1,870 15 x 72 16.5 x 120
Tube rack OR
336824A
3,000 1,870 50 x 16 36.5 x 120
10 x 16 12 x 115
Tube rack BL (B)
S307165A
3,000 1,870 10 x 120 12 x 120
Tube rack GR (B)
S307167A
3,000 1,870 7 x 96 14 x 120
Tube rack YE (B)
S307164A
3,000 1,870 15 x 72 16.5 x 120
Tube rack OR (B)
S307166A
3,000 1,870 50 x 16 36.5 x 120
10 x 16 12 x 115
Tube rack 61x1
S303580A
3,000 1,900 225 x 4 Falcon™ culture tube* 225 / 175 ml culture tube
(marketed product)
175 x 4
Tube rack 62x1
S303896A
3,000 1,830 250 x 4 Nalgene™ bottle 250 ml bottle
(market product)
Tube rack 17x10
S304528A
3,000 1,870 15 x 40 17 x 120 15 ml culture tube
(marketed product)
Tube rack 13.2x18
S304666A
3,000 1,810 7 x 72 ø13 vacuum blood collecting tube (marketed product)
Tube rack 15.5x18
S304667A
3,000 1,810 10 x 72 ø15 vacuum blood collecting tube
50T7S adapter
S305213A
3,000 1,870 50 x 28 30 x 115 50 ml culture tube
(marketed product)
Tube rack 29.5x5(B)
S307253A
3,000 1,830 50 x 20 29 x 115 50 ml culture tube +
(marketed product)
M bucket
346977A
2,000 700 Microplate x 4pcs W 128 x D 86 x H32 96 - hole microplate
(marketed product)
MP bucket
S305521A
3,000 1,650 Microplate x 4pcs W 128 x D 86 X H 55

The rotor marked with this icon can be sterilized by autoclave at 121 ℃ for 20 minutes.
Biosafety of the rotor marked with this icon was validated by an independent and a third party facility (Public Health England, Porton Down, UK). However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
Biosafety of the rotor marked with this icon was verified by our in-house test according to the procedure modified IEC61010-2-020 Annex AA, using Bacillus subtilis containing ≥ 1x10^6 spores/ml. However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.

For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.
Note :


  1. Listed (marketed product) tubes or bottles are commercially available on the market. Please purchase directly from your local supplier.
  2. † Both 50ml free standing culture tubes and 50ml V-bottom culture tubes can be used.
  3. Falcon™ is a registered trademark and the property of Becton, Dickinson and Company. For prevention of deformation, a cushion produced by Falcon (Falcon part No. 2090) is also required.
  4. Nalgene™ is a registered trademark and the property of Thermo Fisher Scientific or its subsidiaries.
  5. Availability or swinging bucket rotor model R8S is restricted by country. (R8S rotor is not sold in North America due to PAT.)

Made-to-Order Rotor : Fixed Angle Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R22A
914299D0
22,000
(21,000)
54,700
(49,800)
7 x 18 16 x 60 7PA tube x 18
R21A
914301D0
21,000
(20,000)
53,250
(48,300)
11 x 16 16 x 82 11PA tube x 16
R19A
914303D0
19,000
(18,000)
45,610
(40,900)
80 x 6 38 x 104 80PA bottle x 6
R17A Non-CE / Non-cCSAus
914305D0
17,000
(16,000)
40,900
(36,200)
50 x 14 29 x 104 50PA tube x 14
R14A3
914322D0
14,000 29,100 100 x 10 38 x 104 80PA bottle x 10
R12A4
914327D0
12,000 23,800 / 21,400 2 x 72 11 x 41 Eppendorf® tube
(marketed product)

The rotor marked with this icon can be sterilized by autoclave at 121ºC for 20 minutes.
Biosafety of the rotor marked with this icon was validated by an independent and a third party facility (Public Health England, Porton Down, UK). However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
Biosafety of the rotor marked with this icon was verified by our in-house test according to the procedure modified IEC61010-2-020 Annex AA, using Bacillus subtilis containing ≥ 1x10^6 spores/ml. However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.

For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.
Note :


  1. Listed (marketed product) tubes or bottles are commercially available on the market. Please purchase directly from your local supplier.
  2. Non-CE / Non-cCSAus rotors cannot be used with CR22N (CE / cCSAus model), due to higher kinetic energy and rotor ID identification. Non-CE / Non-cCSAus rotors are not available in EU and US/Canada market.
  3. Values in parentheses in the maximum speed and maximum RCF columns are those at which the rotor temperature can be cooled at 4 ℃. The rotor temperature can be cooled at or below 15 ℃ at the maximum speed/RCF. (when room temperature is 25 ℃)
  4. Eppendorf®: is the registered trademark of Eppendorf AG, Germany.

Made-to-Order Rotor : Swinging Bucket Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R15S3
914339D0
15,000 28,700 11 x 4 16 x 82 11PA tube x 4
R10S
914312D0
10,000 16,470 50 x 4 29 x 104 50PA tube x 4
R7S
914313D0
7,000 9,420 300 x 4 62 x 137 300PA bottle x 4
R6S
914334D0
5,700 5,010 Microplate x 2pcs W 128 x D 86 X H 55 96 - hole microplate
(marketed product)
2x48S adapter
S408787A
5,700 5,010 2 x 96 11 x 41 2.0 / 1,5 ml Micro tube
(marketed product)
0.2x96MP adapter
S408786A
5,700 5,010 96 - hole microplate for PCR - 96 - hole microplate for PCR
(marketed product)

For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.
Note :


  1. Listed (marketed product) tubes or bottles are commercially available on the market. Please purchase directly from your local supplier.

Made-to-Order Rotor : Special Sealed-type Fixed Angle Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R18AY
914328D0
18,000 38,800 50 x 8 29 x 103 50PA bottle x 8
R16AY
914329D0
16,000 32,300 80 x 6 38 x 104 80PA bottle x 6
R12AY
914330D0
12,000 22,200 250 x 4 62 x 124 250PP bottle x 4
R8AY
914331D0
8,000 12,000 500 x 6 73 x 163 500PA bottle x 6

For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.

Made-to-Order Rotor : Special Rotors

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
Horizontal Rotor
R10H
914348D0
10,000 13,000 Microplate x 4pcs W 128 x D 86 x H 45 96 - hole microplate
(marketed product)
Soil Dehydration Rotor
R11D2
914353D0
11,000 15,800 (PF2.6-4.2) 100 x 4 50 x 51 Dehydration tool x 4
Continuous Flow Rotor
R18C*
Non-CE
Non-cCSAus

91131900
18,000 34,960 1,000 (500 *1) - -
R18C seal unit (E) for CR22N (P/N S203036A), 18 batch unit for CR22N (P/N S217247A)
R13C*
Non-CE
Non-cCSAus

91432000
13,000 21,260 2,200 (1,600 *1) - -
R13C seal unit (E) for CR22N (P/N S203037A), 13 batch unit for CR22N (P/N 217248A)
R10C*
Non-CE
Non-cCSAus

91432100
10,000 14,950 3,200 (2,300 *1) - -
R10C seal unit (E) for CR22N (P/N S203038A), 10 batch unit for CR22N (P/N 217250A)

For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.
Note :


  1. Listed (marketed product) tubes or bottles are commercially available on the market. Please purchase directly from your local supplier.
  2. Non-CE / Non-cCSAus rotors cannot be used with CR22n (CE / cCSAus model), due to higher kinetic energy and rotor ID identification. Non-CE / Non-cCSAus rotors are not available in EU and US/Canada market.
  3. * Collector units for R18C / R13C / R10C cannot be used on CR22N.
  4. *1 : Maximum pellet capacity (ml)